TS-XL/R5 のカーネルに関するページです。

Vanilla kernel

NAS-Centralの Buffalo Forum にて kiddouk氏が TS-WXL用の vanilla kernel に対するパッチを公開された。TS-WXL と TS-XL はハードウェアが非常に似ているので、少し手を加えれば TS-XL でも動く可能性大。

DS-HTGLのDebian化の際に用いた config ファイルベースの場合

$ wget http://www.kolios.dk/patch/linux-buffalo-wxl-2.6.32.patch
$ tar jxvf linux-2.6.32.tar.bz2
$ cd linux-2.6.32/
$ patch -p 1 < ../linux-buffalo-wxl-2.6.32.patch
$ export PATH=/usr/cross/arm-2009q3/bin:$PATH
$ make ARCH=arm mv78xx0_defconfig
$ make ARCH=arm menuconfig
$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- zImage
$ devio > foo 'wl 0xe3a01c0c,4' 'wl 0xe381108a,4'
$ cat foo arch/arm/boot/zImage > zImage.new
$ mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n 'linux-2.6.32' -d zImage.new uImage.buffalo-2.6.32

まだ途中

Starting kernel ...

Uncompressing Linux................................................................................................................................................................. done, booting the kernel.
<5>Linux version 2.6.32 (itou-r@debian) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #3 PREEMPT Mon Mar 1 09:02:32 JST 2010
CPU: Feroceon [41159260] revision 0 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Buffalo Nas WXL
<4>Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 131072
<7>free_area_init_node: node 0, pgdat c04f310c, node_mem_map c1801000
<7>  Normal zone: 1024 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 130048 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
<5>Kernel command line: console=ttyS0,115200 root=/dev/ram0 rw initrd=0x00900040,15M panic=5
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 512MB = 512MB total
<5>Memory: 498816KB available (4656K code, 415K data, 132K init, 0K highmem)
<6>SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Hierarchical RCU implementation.
<6>NR_IRQS:128
<6>Calibrating delay loop... <c>797.90 BogoMIPS (lpj=3989504)
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>xor: measuring software checksum speed
<6>   arm4regs  :   687.200 MB/sec
<6>   8regs     :   618.800 MB/sec
<6>   32regs    :   771.200 MB/sec
<6>xor: using function: 32regs (771.200 MB/sec)
<6>NET: Registered protocol family 16
<6>MV78100-A0 core #0, PCLK = 800MHz, L2 = 267MHz, HCLK = 400MHz, TCLK = 167MHz
<6>Feroceon L2: Enabling L2
<6>Feroceon L2: Cache support initialised.
<3>gpiochip_add: gpios 0..31 (orion_gpio) not registered
<7>initial MPP regs: 22222222 00552222 00000000 00504444 00001111 00000000 00000033
<7>  final MPP regs: 22222222 33302222 00000000 00504444 11111111 00000000 00000033
bio: create slab <bio-0> at 0
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
raid6: int32x1     87 MB/s
raid6: int32x2    108 MB/s
raid6: int32x4    103 MB/s
raid6: int32x8     83 MB/s
raid6: using algorithm int32x2 (108 MB/s)
<6>Switching to clocksource orion_clocksource
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Trying to unpack rootfs image as initramfs...
<1>Unable to handle kernel paging request at virtual address e00bb4f6
<1>pgd = c0004000
<1>[e00bb4f6] *pgd=00000000
<0>Internal error: Oops: 5 [#1] PREEMPT
<0>last sysfs file: 
<d>Modules linked in:
CPU: 0    Not tainted  (2.6.32 #3)
PC is at unpack_to_rootfs+0x250/0x46c
LR is at unpack_to_rootfs+0x2dc/0x46c
pc : [<c000ada0>]    lr : [<c000ae2c>]    psr: 20000013
sp : df82bf20  ip : 00000000  fp : 00000000
r10: 00000000  r9 : 00000000  r8 : 1f7bb4b6
r7 : df934000  r6 : c0023c80  r5 : e1744b4a  r4 : e00bb4f6
r3 : c0023c80  r2 : 00000000  r1 : 00000001  r0 : 00000000
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 0005397f  Table: 00004000  DAC: 00000017
<0>Process swapper (pid: 1, stack limit = 0xdf82a270)
<0>Stack: (0xdf82bf20 to 0xdf82c000)
<0>bf20: 00000000 c04f6764 c000a690 00000000 00000000 00000000 00000000 00000000
<0>bf40: c04f675c 00000001 00000200 00000000 00000000 00000000 00000000 c000b73c
<0>bf60: df8189b8 00000000 00000000 00000000 00000001 c023f06c 00000000 c0243464
<0>bf80: ffffffff ffffffff ffffffff 00000000 00000000 00000001 00000000 00000000
<0>bfa0: 00000000 00000000 c000b6e4 00000000 00000001 00000000 00000000 00000000
<0>bfc0: 00000000 c00293a8 c000b6e4 00000000 c04f6500 c00218f4 c002169c 00000000
<0>bfe0: 00000000 00000000 00000000 c0008574 00000000 c002aa0c feedfeed feedfeed
[<c000ada0>] (unpack_to_rootfs+0x250/0x46c) from [<c000b73c>] (populate_rootfs+0x58/0x2a8)
[<c000b73c>] (populate_rootfs+0x58/0x2a8) from [<c00293a8>] (do_one_initcall+0x58/0x1b0)
[<c00293a8>] (do_one_initcall+0x58/0x1b0) from [<c0008574>] (kernel_init+0x94/0x110)
[<c0008574>] (kernel_init+0x94/0x110) from [<c002aa0c>] (kernel_thread_exit+0x0/0x8)
<0>Code: e5832000 e1c301f0 e5832018 ea00004a (e5d42000) 
<4>---[ end trace da227214a82491b7 ]---
<0>Kernel panic - not syncing: Attempted to kill init!
<0>Rebooting in 5 seconds.. 

kiddouk氏提供の config を使った場合

Starting kernel ...

Uncompressing Linux........................................................................................................................................................................................................................................................................... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32 (itou-r@debian) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #1 Tue Mar 2 19:03:31 JST 2010
[    0.000000] CPU: Feroceon [41159260] revision 0 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Buffalo Nas WXL
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram0 rw initrd=0x00900040, 15M panic=5
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 510592KB available (7784K code, 806K data, 172K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU-based detection of stalled CPUs is enabled.
[    0.000000] NR_IRQS:128
[    0.000000] Console: colour dummy device 80x30
[   25.769970] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[   25.999947] Security Framework initialized
[   25.999966] SELinux:  Disabled at boot.
[   26.000024] Mount-cache hash table entries: 512
[   26.000330] Initializing cgroup subsys ns
[   26.000346] Initializing cgroup subsys cpuacct
[   26.000359] Initializing cgroup subsys devices
[   26.000412] CPU: Testing write buffer coherency: ok
[   26.003020] xor: measuring software checksum speed
[   26.049831]    arm4regs  :   687.200 MB/sec
[   26.099828]    8regs     :   618.800 MB/sec
[   26.149826]    32regs    :   771.200 MB/sec
[   26.149839] xor: using function: 32regs (771.200 MB/sec)
[   26.150039] NET: Registered protocol family 16
[   26.152168] MV78100-A0 core #0, PCLK = 800MHz, L2 = 267MHz, HCLK = 400MHz, TCLK = 167MHz
[   26.152201] Feroceon L2: Enabling L2
[   26.152257] Feroceon L2: Cache support initialised.
[   26.152279] gpiochip_add: gpios 0..31 (orion_gpio) not registered
[   26.169361] bio: create slab <bio-0> at 0
[   26.171060] vgaarb: loaded
[   26.171745] SCSI subsystem initialized
[   26.172537] usbcore: registered new interface driver usbfs
[   26.172795] usbcore: registered new interface driver hub
[   26.172975] usbcore: registered new device driver usb
[   26.340479] raid6: int32x1     83 MB/s
[   26.510182] raid6: int32x2    108 MB/s
[   26.680258] raid6: int32x4    104 MB/s
[   26.849879] raid6: int32x8     83 MB/s
[   26.849889] raid6: using algorithm int32x2 (108 MB/s)
[   26.850855] cfg80211: Using static regulatory domain info
[   26.850870] cfg80211: Regulatory domain: US
[   26.850880] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   26.850898] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[   26.850914] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   26.850931] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   26.850947] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   26.850963] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   26.850980] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[   26.851006] cfg80211: Calling CRDA for country: US
[   26.851145] Switching to clocksource orion_clocksource
[   26.856419] Slow work thread pool: Starting up
[   26.856552] Slow work thread pool: Ready
[   26.856611] FS-Cache: Loaded
[   26.856833] CacheFiles: Loaded
[   26.858414] NET: Registered protocol family 2
[   26.858730] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   26.859729] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   26.860382] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   26.860648] TCP: Hash tables configured (established 16384 bind 16384)
[   26.860662] TCP reno registered
[   26.860877] NET: Registered protocol family 1
[   26.861290] RPC: Registered udp transport module.
[   26.861303] RPC: Registered tcp transport module.
[   26.861314] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   26.862470] audit: initializing netlink socket (disabled)
[   26.862508] type=2000 audit(1.088:1): initialized
[   26.863075] VFS: Disk quotas dquot_6.5.2
[   26.863220] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   26.864255] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   26.865298] JFS: nTxBlock = 3990, nTxLock = 31924
[   26.866877] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   26.867683] SGI XFS Quota Management subsystem
[   26.867720] msgmni has been set to 997
[   26.870296] alg: No test for stdrng (krng)
[   26.870328] async_tx: api initialized (async)
[   26.870555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   26.870574] io scheduler noop registered
[   26.870585] io scheduler anticipatory registered
[   26.870596] io scheduler deadline registered
[   26.870667] io scheduler cfq registered (default)
[   26.881997] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   26.883130] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 12) is a 16550A
[   27.356773] console [ttyS0] enabled
[   27.360653] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 13) is a 16550A
[   27.367855] serial8250.2: ttyS2 at MMIO 0xf1012200 (irq = 14) is a 16550A
[   27.375020] serial8250.3: ttyS3 at MMIO 0xf1012300 (irq = 15) is a 16550A
[   27.389237] brd: module loaded
[   27.395752] loop: module loaded
[   27.399530] sata_mv sata_mv.0: version 1.28
[   27.403954] sata_mv sata_mv.0: slots 32 ports 2
[   27.409826] scsi0 : sata_mv
[   27.413013] scsi1 : sata_mv
[   27.416013] ata1: SATA max UDMA/133 irq 26
[   27.420094] ata2: SATA max UDMA/133 irq 26
[   27.425563] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[   27.432105] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[   27.450366] MV-643xx 10/100/1000 ethernet driver version 1.4
[   27.456276] mv643xx_eth smi: probed
[   27.463014] net eth0: port 0 with MAC address 00:1d:73:df:04:d8
[   27.472030] net eth1: port 0 with MAC address 00:1d:73:df:04:d9
[   27.478055] tun: Universal TUN/TAP device driver, 1.6
[   27.483118] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   27.489449] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   27.498091] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   27.506919] console [netcon0] enabled
[   27.510570] netconsole: network logging started
[   27.515523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   27.522117] orion-ehci orion-ehci.0: Marvell Orion EHCI
[   27.527583] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   27.561193] orion-ehci orion-ehci.0: irq 16, io mem 0xf1050000
[   27.581178] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   27.587133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   27.593911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   27.601109] usb usb1: Product: Marvell Orion EHCI
[   27.605801] usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd
[   27.611182] usb usb1: SerialNumber: orion-ehci.0
[   27.616141] usb usb1: configuration #1 chosen from 1 choice
[   27.621943] hub 1-0:1.0: USB hub found
[   27.625715] hub 1-0:1.0: 1 port detected
[   27.629986] orion-ehci orion-ehci.1: Marvell Orion EHCI
[   27.635467] orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2
[   27.671195] orion-ehci orion-ehci.1: irq 17, io mem 0xf1051000
[   27.691183] orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00
[   27.697129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   27.703906] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   27.711096] usb usb2: Product: Marvell Orion EHCI
[   27.715791] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[   27.721183] usb usb2: SerialNumber: orion-ehci.1
[   27.726157] usb usb2: configuration #1 chosen from 1 choice
[   27.731961] hub 2-0:1.0: USB hub found
[   27.735725] hub 2-0:1.0: 1 port detected
[   27.740003] orion-ehci orion-ehci.2: Marvell Orion EHCI
[   27.745486] orion-ehci orion-ehci.2: new USB bus registered, assigned bus number 3
[   27.761203] ata1: SATA link down (SStatus 0 SControl F300)
[   27.781194] orion-ehci orion-ehci.2: irq 18, io mem 0xf1052000
[   27.801178] orion-ehci orion-ehci.2: USB 2.0 started, EHCI 1.00
[   27.807122] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   27.813906] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   27.821101] usb usb3: Product: Marvell Orion EHCI
[   27.825794] usb usb3: Manufacturer: Linux 2.6.32 ehci_hcd
[   27.831184] usb usb3: SerialNumber: orion-ehci.2
[   27.836233] usb usb3: configuration #1 chosen from 1 choice
[   27.842048] hub 3-0:1.0: USB hub found
[   27.845818] hub 3-0:1.0: 1 port detected
[   27.850502] usbcore: registered new interface driver usblp
[   27.856142] usbcore: registered new interface driver cdc_wdm
[   27.861826] Initializing USB Mass Storage driver...
[   27.866888] usbcore: registered new interface driver usb-storage
[   27.872901] USB Mass Storage support registered.
[   27.877630] usbcore: registered new interface driver ums-alauda
[   27.883693] usbcore: registered new interface driver ums-cypress
[   27.889807] usbcore: registered new interface driver ums-datafab
[   27.895949] usbcore: registered new interface driver ums-freecom
[   27.902098] usbcore: registered new interface driver ums-isd200
[   27.908120] usbcore: registered new interface driver ums-jumpshot
[   27.914345] usbcore: registered new interface driver ums-karma
[   27.920287] usbcore: registered new interface driver ums-onetouch
[   27.926526] usbcore: registered new interface driver ums-sddr09
[   27.932588] usbcore: registered new interface driver ums-sddr55
[   27.938618] usbcore: registered new interface driver ums-usbat
[   27.944799] mice: PS/2 mouse device common for all mice
[   27.950257] i2c /dev entries driver
[   27.954841] Driver for 1-wire Dallas network protocol.
[   27.960338] md: linear personality registered for level -1
[   27.965849] md: raid0 personality registered for level 0
[   27.971143] md: raid1 personality registered for level 1
[   27.976442] md: raid10 personality registered for level 10
[   27.981917] md: raid6 personality registered for level 6
[   27.987204] md: raid5 personality registered for level 5
[   27.992505] md: raid4 personality registered for level 4
[   27.997798] md: multipath personality registered for level -4
[   28.003526] md: faulty personality registered for level -5
[   28.009145] device-mapper: uevent: version 1.0.3
[   28.014028] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[   28.022740] device-mapper: multipath: version 1.1.0 loaded
[   28.028203] device-mapper: multipath round-robin: version 1.0.0 loaded
[   28.034947] cpuidle: using governor ladder
[   28.039027] cpuidle: using governor menu
[   28.043295] Netfilter messages via NETLINK v0.30.
[   28.048037] nf_conntrack version 0.5.0 (7981 buckets, 31924 max)
[   28.054377] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   28.061756] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   28.069638] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   28.076773] ctnetlink v0.93: registering with nfnetlink.
[   28.082186] xt_time: kernel timezone is -0000
[   28.088220] IPv4 over IPv4 tunneling driver
[   28.093805] GRE over IPv4 tunneling driver
[   28.100771] ip_tables: (C) 2000-2006 Netfilter Core Team
[   28.106207] ClusterIP Version 0.8 loaded successfully
[   28.111300] arp_tables: (C) 2002 David S. Miller
[   28.116017] TCP cubic registered
[   28.119439] NET: Registered protocol family 10
[   28.126692] lo: Disabled Privacy Extensions
[   28.137120] tunl0: Disabled Privacy Extensions
[   28.145927] NET: Registered protocol family 17
[   28.150369] NET: Registered protocol family 15
[   28.155099] Bridge firewalling registered
[   28.159103] Ebtables v2.0 registered
[   28.162911] ebt_ulog: out of memory trying to call netlink_kernel_create
[   28.169587] NET: Registered protocol family 5
[   28.174171] NET: Registered protocol family 9
[   28.178512] X.25 for Linux Version 0.2
[   28.182560] lib80211: common routines for IEEE802.11 drivers
[   28.188356] ata2: SATA link down (SStatus 0 SControl F300)
[   28.194336] registered taskstats version 1
[   28.198496] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   28.204807] md: Waiting for all devices to be available before autodetect
[   28.211579] md: If you don't use raid, use raid=noautodetect
[   28.217790] md: Autodetecting RAID arrays.
[   28.221918] md: Scanned 0 and added 0 devices.
[   28.226341] md: autorun ...
[   28.229122] md: ... autorun DONE.
[   28.233799] ufs was compiled with read-only support, can't be mounted as read-write
[   28.242052] UDF-fs: No partition found (1)
[   28.246483] List of all partitions:
[   28.249970] No filesystem could mount root, tried:  reiserfs ext3 ext2 ext4 iso9660 hfsplus hfs ufs adfs udf jfs xfs
[   28.260596] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
[   28.268864] [<c0038b68>] (unwind_backtrace+0x0/0xdc) from [<c059f79c>] (panic+0x40/0x11c)
[   28.277032] [<c059f79c>] (panic+0x40/0x11c) from [<c0008e90>] (mount_block_root+0x254/0x2a4)
[   28.285459] [<c0008e90>] (mount_block_root+0x254/0x2a4) from [<c00090ac>] (prepare_namespace+0x168/0x1c0)
[   28.295004] [<c00090ac>] (prepare_namespace+0x168/0x1c0) from [<c000844c>] (kernel_init+0xec/0x124)
[   28.304039] [<c000844c>] (kernel_init+0xec/0x124) from [<c00347e8>] (kernel_thread_exit+0x0/0x8)
[   28.312797] Rebooting in 5 seconds..

firmware 1.06の uImage.buffalo + Lenny installer 用 initrd を用いた場合

CPU =  MV78

Checking DATA BUS OK!
Checking ADDRESS BUS OK!

Checking DATA BUS
Checking ADDRESS BUS
BUFFALO U-BOOT Start !!! 
 ** LOADER **
 ** BUFFALO BOARD: DB-MV78100-A-BP LE (CFG_ENV_ADDR=fff80000)


U-Boot 1.1.4 (Jun  4 2009 - 11:11:38) Marvell version: 3.3.5
Buffalo Version: 2.06-1.00

U-Boot code: 00600000 -> 0066FFF0  BSS: -> 00684D34

Soc: MV78100 A0 (DDR2)
CPU running @ 800Mhz L2 running @ 266Mhz
SysClock = 400Mhz , TClock = 166Mhz 

DRAM CAS Latency = 5 tRP = 5 tRAS = 19 tRCD=5
DRAM CS[0] base 0x00000000   size 512MB 
DRAM Total size 512MB  64bit width
[512kB@fff80000] Flash: 512 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:512 MB

CPU 0: ARM926 (Rev 0)

Streaming enabled 
Write allocate disabled
FPU initialized to Run Fast Mode.
enaDCPref <NULL>
enaICPref <NULL>
setL2CacheWT no
setL2Size256K no
disL2Ecc no
disL2Prefetch yes
disL2Cache no
env finished


USB 0: host mode
USB 1: host mode
USB 2: host mode
PCI 0: PCI Express Root Complex Interface
PEX interface detected Link X4
PEX 4: interface detected no Link.
Net:   egiga0 [PRIME], egiga1
buffalo_change_power_status > Read 0x5c(swpoff_uboot_passed)
buffalo_change_power_status > Writing 0x5c(swpoff_uboot_passed)

Marvell Serial ATA Adapter
Integrated Sata device found
Found adapter at bus 0, device 1 ... Scanning channels
[1 0 0]: Enable DMA mode
  Device 2 @ 1 0:
Model: Hitachi HDT721010SLA360                  Firm: ST6OA3AA Ser#:       STF607MS0124YK
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)

MAC Address on eth0  : 00:1d:73:xx:xx:xx

Signature version    : 0.00
Signature MACAddress : 

   This is not my HDD!!!
   Anyway load images...

4340004 bytes read
   Image Name:   linux-2.6.32
   Created:      2010-03-04   9:02:58 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4339940 Bytes =  4.1 MB
   Load Address: 00008000
   Entry Point:  00008000

** Unable to read "/initrd.buffalo" from ide 2:1 ** [#zad6355f]
serch_boot_drv (608)>No init_file 2 


** Something is wrong, because of dev_desc->blksz is 0!!! [#e78eb8ee]
disk1 is not found!


** Something is wrong, because of dev_desc->blksz is 0!!! [#r1de077d]
disk2 is not found!


** Something is wrong, because of dev_desc->blksz is 0!!! [#c17cb89e]
disk3 is not found!

 ***** Debug *****
diskinfo[0].IsMyDisk = 0
diskinfo[0].uImage_date = 1267693378
diskinfo[0].initrd_date = 0
diskinfo[1].IsMyDisk = 0
diskinfo[1].uImage_date = 0
diskinfo[1].initrd_date = 0
diskinfo[2].IsMyDisk = 0
diskinfo[2].uImage_date = 0
diskinfo[2].initrd_date = 0
diskinfo[3].IsMyDisk = 0
diskinfo[3].uImage_date = 0
diskinfo[3].initrd_date = 0

All disks are don't have signature or not mine!
newest_fw_dev is updated to 2

Booting from Device 2 
hit any key to switch tftp boot.
Hit any key to stop autoboot:  0 
Hit any key to stop autoboot:  0 
Marvell>> setenv bootargs_root 'root=/dev/ram0 rw initrd=0x00900040, 15M panic=5'
Marvell>> tftpboot 0x02000000 $(kernel)
Using egiga0 device
TFTP from server 192.168.aa.bb; our IP address is 192.168.aa.cc
Filename 'uImage.buffalo'.
Load address: 0x2000000
Loading: #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ###########################################################
done
Bytes transferred = 2294752 (2303e0 hex)
Marvell>> tftpboot 0x00900000 $(initrd)
Using egiga0 device
TFTP from server 192.168.aa.bb; our IP address is 192.168.aa.cc
Filename 'initrd.buffalo'.
Load address: 0x900000
Loading: #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ##################################
done
Bytes transferred = 2503355 (2632bb hex)
Marvell>> setenv bootargs $(bootargs_base) $(bootargs_root)
Marvell>> bootm 0x02000000 0x00900000
<<stop_sound>>
## Booting image at 02000000 ...
   Image Name:   Linux-2.6.22.18
   Created:      2009-07-17   4:57:28 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2294688 Bytes =  2.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
call do_bootm_linux
## Loading Ramdisk Image at 00900000 ...
   Image Name:   initrd
   Created:      2010-03-03   7:21:57 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    2503291 Bytes =  2.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

CONFIG_BUFFALO_PLATFORM ---
Uncompressing Linux................................................................................................................................................ done, booting the kernel.
Linux version 2.6.22.18 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #539 Fri Jul 17 13:57:12 JST 2009
CPU: ARM926EJ-S [41159260] revision 0 (ARMv5TE), cr=00053977
Machine: Feroceon-MV78XX0
Using UBoot passing parameters structure
u.mv_uboot.env_addr is 0xfff80000. Using tag's value.
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists.  Total pages: 130048
Kernel command line: console=ttyS0,115200 root=/dev/ram0 rw initrd=0x00900040, 15M panic=5
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB 0MB 0MB 0MB = 512MB total
Memory: 515072KB available (4180K code, 319K data, 128K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16

CPU 0, CPU Interface
-------------
SDRAM_CS0.... ....base 00000000, size 512MB 
SDRAM_CS1.... ....disable
SDRAM_CS2.... ....disable
SDRAM_CS3.... ....disable
DEVICE_CS0... ....base f8000000, size  32MB 
DEVICE_CS1... ....base fe000000, size   1MB 
DEVICE_CS2... ....base fc000000, size   1MB 
DEVICE_CS3... ....no such
DEV_BOOCS.... ....base fff00000, size 512KB 
DEVICE_SPI... ....base fff00000, size 512KB 
PEX0_IO...... ....base f2000000, size   8MB 
PEX0_MEM0.... ....base c8000000, size  64MB 
PEX1_IO...... ....base f3000000, size   8MB 
PEX1_MEM0.... ....base cc000000, size  64MB 
PEX2_IO...... ....no such
PEX2_MEM0.... ....no such
PEX3_IO...... ....base f5000000, size   8MB 
PEX3_MEM0.... ....base d4000000, size  64MB 
PEX4_IO...... ....base f6000000, size   8MB 
PEX4_MEM0.... ....base d8000000, size  64MB 
PEX5_IO...... ....no such
PEX5_MEM0.... ....no such
PEX6_IO...... ....no such
PEX6_MEM0.... ....no such
PEX7_IO...... ....no such
PEX7_MEM0.... ....no such
CRYPT_ENG..... ....base f7000000, size   2MB 
INTER_REGS... ....base f1000000, size   1MB 

  Marvell Development Board (LSP Version 2.0.2_MV78XX0)-- DB-MV78100-A-BP-BUFFALO  Soc: MV78100 A0 LE

 Detected Tclk 166666667 and SysClk 400000000 
Marvell USB EHCI Host controller #0: 80917600
Marvell USB EHCI Host controller #1: 80917400
Marvell USB EHCI Host controller #2: 80917200
PEX0 interface detected Link X4
PEX4 interface detected no Link.
PCI: bus0: Fast back to back transfers disabled
SCSI subsystem initialized
Time: orion_clocksource clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
RTC registered.
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
>BuffaloCpuInterrupts_init
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
MICON V2 (C) BUFFALO INC. V.1.00 installed.
UPSDRV (C) BUFFALO INC. V.1.00 installed.
  OMRON contact type ups shutdown support enabled!
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
Buffalo RTC Driver (C) BUFFALO INC. Ver.1.00 (RS5C372) installed.
Buffalo GPIO SATA Hotplug Event Driver (C) BUFFALO INC. Ver.1.00 installed.
Use the XOR engines (acceleration) for enhancing the following functions:
  o RAID 5 Xor calculation
  o kernel memcpy
  o kenrel memzero
Number of XOR engines to use: 2
cesadev_init(8001237c)
mvCesaInit: sessions=640, queue=64, pSram=f7000000
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 12) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 13) is a 16550A
serial8250.2: ttyS2 at MMIO 0xf1012200 (irq = 14) is a 16550A
RAMDISK driver initialized: 3 RAM disks of 32768K size 1024 blocksize
loop: module loaded
Load Marvell Ethernet Driver
  o Cached descriptors in DRAM
  o DRAM SW cache-coherency
  o Single RX Queue support - ETH_DEF_RXQ=0
  o Single TX Queue support - ETH_DEF_TXQ=0
  o TCP segmentation offload enabled
  o Receive checksum offload enabled
  o Transmit checksum offload enabled
  o Network Fast Processing (Routing) supported
  o Proc tool API enabled
  o Rx descripors: q0=128
  o Tx descripors: q0=532
  o Loading network interface: 
eth0 eth1 
Network Fast Processing Disabled
mvFpRuleDb (9fe90000): 16384 entries, 65536 bytes
mvSataInitAdapter : regVal changed(0x0000ff10)
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi2 : Marvell SCSI to SATA adapter
scsi3 : Marvell SCSI to SATA adapter
** BUFFALO Disable Command Queuing Function [0 0] ** [#veb8e94a]
scsi 0:0:0:0: Direct-Access     Hitachi  HDT721010SLA360  ST6O PQ: 0 ANSI: 5
Linux IAL (ERROR) [0 0 0]: set device max sectors to 2048 
Integrated Sata device found
mvSataInitAdapter : regVal changed(0x00000010)
scsi4 : Marvell SCSI to SATA adapter
scsi5 : Marvell SCSI to SATA adapter
Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = 9feb1720
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
SPI Serial flash detected @ 0xfff00000, 512KB (8sec x 64KB)
cmdlinepart partition parsing not available
    Write size     : 0x00000800
    OOB size       : 0x00000040
    Erase size     : 0x00020000
NAND device: Manufacturer ID: 0x20, Chip ID: 0xdc (ST Micro NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 2415 at 0x12de0000
cmdlinepart partition parsing not available
Using static partition definition
Creating 2 MTD partitions on "nand_mtd":
0x00000000-0x02000000 : "nboot"
0x02000000-0x20000000 : "nroot"
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    113 MB/s
raid6: int32x2    130 MB/s
raid6: int32x4    133 MB/s
raid6: int32x8     98 MB/s
raid6: using algorithm int32x4 (133 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: measuring checksumming speed
   arm4regs  :   824.400 MB/sec
   8regs     :   742.400 MB/sec
   32regs    :   822.400 MB/sec
raid5: using function: arm4regs (824.400 MB/sec)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
List of all partitions:
0800  976762584 sda driver: sd
  0801     265055 sda1
  0802    5116702 sda2
  0803    1052257 sda3
1f00        512 mtdblock0 (driver?)
1f01      32768 mtdblock1 (driver?)
1f02     491520 mtdblock2 (driver?)
No filesystem could mount root, tried:  ext3 ext2 jffs2 xfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
Rebooting in 5 seconds..BuffaloGpio_ChangePowerStatus > Writing 0x18
>miconCntl_Reboot
>miconCntl_ShutdownWait

firmware 1.06の uImage.buffalo で Debian Lenny をインストールした場合

CPU =  MV78

Checking DATA BUS OK!
Checking ADDRESS BUS OK!

Checking DATA BUS
Checking ADDRESS BUS
BUFFALO U-BOOT Start !!! 
 ** LOADER **
 ** BUFFALO BOARD: DB-MV78100-A-BP LE (CFG_ENV_ADDR=fff80000)


U-Boot 1.1.4 (Jun  4 2009 - 11:11:38) Marvell version: 3.3.5
Buffalo Version: 2.06-1.00

U-Boot code: 00600000 -> 0066FFF0  BSS: -> 00684D34

Soc: MV78100 A0 (DDR2)
CPU running @ 800Mhz L2 running @ 266Mhz
SysClock = 400Mhz , TClock = 166Mhz 

DRAM CAS Latency = 5 tRP = 5 tRAS = 19 tRCD=5
DRAM CS[0] base 0x00000000   size 512MB 
DRAM Total size 512MB  64bit width
[512kB@fff80000] Flash: 512 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:512 MB

CPU 0: ARM926 (Rev 0)

Streaming enabled 
Write allocate disabled
FPU initialized to Run Fast Mode.
enaDCPref <NULL>
enaICPref <NULL>
setL2CacheWT no
setL2Size256K no
disL2Ecc no
disL2Prefetch yes
disL2Cache no
env finished


USB 0: host mode
USB 1: host mode
USB 2: host mode
PCI 0: PCI Express Root Complex Interface
PEX interface detected Link X4
PEX 4: interface detected no Link.
Net:   egiga0 [PRIME], egiga1
buffalo_change_power_status > Read 0x5c(swpoff_uboot_passed)
buffalo_change_power_status > Writing 0x5c(swpoff_uboot_passed)
Skip to wake up disk0.(already waken up)
Skip to wake up disk1.(already waken up)
Skip to wake up disk2.(already waken up)
Skip to wake up disk3.(already waken up)

Marvell Serial ATA Adapter
Integrated Sata device found
Found adapter at bus 0, device 1 ... Scanning channels
[1 0 0]: Enable DMA mode
  Device 2 @ 1 0:
Model: ST3250310AS                              Firm: 3.AAF    Ser#:             6RY7VZ5Y
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)
[1 1 0]: Enable DMA mode
  Device 3 @ 1 1:
Model: ST3250310AS                              Firm: 4.AAA    Ser#:             6RYMWMYM
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)

MAC Address on eth0  : 00:1d:73:df:04:d8

Signature version    : 0.00
Signature MACAddress : 

   This is not my HDD!!!
   Anyway load images...

2294752 bytes read
   Image Name:   Linux-2.6.22.18
   Created:      2009-07-17   4:57:28 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2294688 Bytes =  2.2 MB
   Load Address: 00008000
   Entry Point:  00008000

8909658 bytes read
   Image Name:   initrd
   Created:      2010-03-07   8:16:15 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    8909594 Bytes =  8.5 MB
   Load Address: 00000000
   Entry Point:  00000000

Signature version    : 0.00
Signature MACAddress : 

   This is not my HDD!!!
   Anyway load images...

2294752 bytes read
   Image Name:   Linux-2.6.22.18
   Created:      2009-07-17   4:57:28 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2294688 Bytes =  2.2 MB
   Load Address: 00008000
   Entry Point:  00008000

8909658 bytes read
   Image Name:   initrd
   Created:      2010-03-07   8:16:15 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    8909594 Bytes =  8.5 MB
   Load Address: 00000000
   Entry Point:  00000000


** Something is wrong, because of dev_desc->blksz is 0!!!
disk2 is not found!


** Something is wrong, because of dev_desc->blksz is 0!!!
disk3 is not found!

 ***** Debug *****
diskinfo[0].IsMyDisk = 0
diskinfo[0].uImage_date = 1247806648
diskinfo[0].initrd_date = 1267949775
diskinfo[1].IsMyDisk = 0
diskinfo[1].uImage_date = 1247806648
diskinfo[1].initrd_date = 1267949775
diskinfo[2].IsMyDisk = 0
diskinfo[2].uImage_date = 0
diskinfo[2].initrd_date = 0
diskinfo[3].IsMyDisk = 0
diskinfo[3].uImage_date = 0
diskinfo[3].initrd_date = 0

All disks are don't have signature or not mine!
newest_fw_dev is updated to 2

Booting from Device 2 
hit any key to switch tftp boot.
Hit any key to stop autoboot:  0 
Hit any key to stop autoboot:  0 

2294752 bytes read

8909658 bytes read
<<stop_sound>>
## Booting image at 02000000 ...
   Image Name:   Linux-2.6.22.18
   Created:      2009-07-17   4:57:28 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2294688 Bytes =  2.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
call do_bootm_linux
## Loading Ramdisk Image at 00900000 ...
   Image Name:   initrd
   Created:      2010-03-07   8:16:15 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    8909594 Bytes =  8.5 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

CONFIG_BUFFALO_PLATFORM ---
Uncompressing Linux................................................................................................................................................ done, booting the kernel.
Linux version 2.6.22.18 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #539 Fri Jul 17 13:57:12 JST 2009
CPU: ARM926EJ-S [41159260] revision 0 (ARMv5TE), cr=00053977
Machine: Feroceon-MV78XX0
Using UBoot passing parameters structure
u.mv_uboot.env_addr is 0xfff80000. Using tag's value.
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists.  Total pages: 130048
Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00900040,15M panic=5 BOOTVER=2.06
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB 0MB 0MB 0MB = 512MB total
Memory: 499584KB available (4180K code, 319K data, 128K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16

CPU 0, CPU Interface
-------------
SDRAM_CS0.... ....base 00000000, size 512MB 
SDRAM_CS1.... ....disable
SDRAM_CS2.... ....disable
SDRAM_CS3.... ....disable
DEVICE_CS0... ....base f8000000, size  32MB 
DEVICE_CS1... ....base fe000000, size   1MB 
DEVICE_CS2... ....base fc000000, size   1MB 
DEVICE_CS3... ....no such
DEV_BOOCS.... ....base fff00000, size 512KB 
DEVICE_SPI... ....base fff00000, size 512KB 
PEX0_IO...... ....base f2000000, size   8MB 
PEX0_MEM0.... ....base c8000000, size  64MB 
PEX1_IO...... ....base f3000000, size   8MB 
PEX1_MEM0.... ....base cc000000, size  64MB 
PEX2_IO...... ....no such
PEX2_MEM0.... ....no such
PEX3_IO...... ....base f5000000, size   8MB 
PEX3_MEM0.... ....base d4000000, size  64MB 
PEX4_IO...... ....base f6000000, size   8MB 
PEX4_MEM0.... ....base d8000000, size  64MB 
PEX5_IO...... ....no such
PEX5_MEM0.... ....no such
PEX6_IO...... ....no such
PEX6_MEM0.... ....no such
PEX7_IO...... ....no such
PEX7_MEM0.... ....no such
CRYPT_ENG..... ....base f7000000, size   2MB 
INTER_REGS... ....base f1000000, size   1MB 

  Marvell Development Board (LSP Version 2.0.2_MV78XX0)-- DB-MV78100-A-BP-BUFFALO  Soc: MV78100 A0 LE

 Detected Tclk 166666667 and SysClk 400000000 
Marvell USB EHCI Host controller #0: 808fd600
Marvell USB EHCI Host controller #1: 808fd400
Marvell USB EHCI Host controller #2: 808fd200
PEX0 interface detected Link X4
PEX4 interface detected no Link.
PCI: bus0: Fast back to back transfers disabled
SCSI subsystem initialized
Time: orion_clocksource clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 15360K
RTC registered.
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
>BuffaloCpuInterrupts_init
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
MICON V2 (C) BUFFALO INC. V.1.00 installed.
UPSDRV (C) BUFFALO INC. V.1.00 installed.
  OMRON contact type ups shutdown support enabled!
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
Buffalo RTC Driver (C) BUFFALO INC. Ver.1.00 (RS5C372) installed.
Buffalo GPIO SATA Hotplug Event Driver (C) BUFFALO INC. Ver.1.00 installed.
Use the XOR engines (acceleration) for enhancing the following functions:
  o RAID 5 Xor calculation
  o kernel memcpy
  o kenrel memzero
Number of XOR engines to use: 2
cesadev_init(8001237c)
mvCesaInit: sessions=640, queue=64, pSram=f7000000
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 12) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 13) is a 16550A
serial8250.2: ttyS2 at MMIO 0xf1012200 (irq = 14) is a 16550A
RAMDISK driver initialized: 3 RAM disks of 32768K size 1024 blocksize
loop: module loaded
Load Marvell Ethernet Driver
  o Cached descriptors in DRAM
  o DRAM SW cache-coherency
  o Single RX Queue support - ETH_DEF_RXQ=0
  o Single TX Queue support - ETH_DEF_TXQ=0
  o TCP segmentation offload enabled
  o Receive checksum offload enabled
  o Transmit checksum offload enabled
  o Network Fast Processing (Routing) supported
  o Proc tool API enabled
  o Rx descripors: q0=128
  o Tx descripors: q0=532
  o Loading network interface: 
eth0 eth1 
Network Fast Processing Disabled
mvFpRuleDb (9f180000): 16384 entries, 65536 bytes
mvSataInitAdapter : regVal changed(0x0000ff10)
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi2 : Marvell SCSI to SATA adapter
scsi3 : Marvell SCSI to SATA adapter
** BUFFALO Disable Command Queuing Function [0 0] **
** BUFFALO Disable Command Queuing Function [0 1] **
scsi 0:0:0:0: Direct-Access     Seagate  ST3250310AS      3.AA PQ: 0 ANSI: 5
Linux IAL (ERROR) [0 0 0]: set device max sectors to 2048 
scsi 1:0:0:0: Direct-Access     Seagate  ST3250310AS      4.AA PQ: 0 ANSI: 5
Linux IAL (ERROR) [0 1 0]: set device max sectors to 2048 
Integrated Sata device found
mvSataInitAdapter : regVal changed(0x00000010)
scsi4 : Marvell SCSI to SATA adapter
scsi5 : Marvell SCSI to SATA adapter
Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = 9f17b720
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = 9f17b720
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
SPI Serial flash detected @ 0xfff00000, 512KB (8sec x 64KB)
cmdlinepart partition parsing not available
    Write size     : 0x00000800
    OOB size       : 0x00000040
    Erase size     : 0x00020000
NAND device: Manufacturer ID: 0x20, Chip ID: 0xdc (ST Micro NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 2415 at 0x12de0000
cmdlinepart partition parsing not available
Using static partition definition
Creating 2 MTD partitions on "nand_mtd":
0x00000000-0x02000000 : "nboot"
0x02000000-0x20000000 : "nroot"
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    115 MB/s
raid6: int32x2    130 MB/s
raid6: int32x4    133 MB/s
raid6: int32x8     98 MB/s
raid6: using algorithm int32x4 (133 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: measuring checksumming speed
   arm4regs  :   824.400 MB/sec
   8regs     :   742.400 MB/sec
   32regs    :   822.400 MB/sec
raid5: using function: arm4regs (824.400 MB/sec)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda4
md: sda4 has invalid sb, not importing!
md: invalid raid superblock magic on sdb4
md: sdb4 has invalid sb, not importing!
md: autorun ...
md: considering sdb2 ...
md:  adding sdb2 ...
md: sdb1 has different UUID to sdb2
md:  adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md1
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
---- in linuxrc ---
Version 1.00 2008/ 7/ 1
Mon Mar  8 09:28:52 JST 2010
CheckDevices
LibSys_GetUsbDiskStartNum : Usb device not found(/sys/block/sdc/device). Returning 3
grep: /var/tmp/devlink: No such file or directory
linuxrc:choose operation (timeout 4[s])
 1:RamRoot 2:sda1 2:sda2 other:HddRoot  ? -HddRoot-
-- rebuild mdadm.conf for BOOT, ROOTFS --
mdadm: cannot open /dev/disk?_5: No such file or directory
mdadm: No arrays found in config file
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to 20
Starting :fsck_disks(boot) ...         [Success.]
-- rebuild mdadm.conf for BOOT, ROOTFS --
mdadm: cannot open /dev/disk?_5: No such file or directory
mdadm: No arrays found in config file
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to 20
/sys/block/md1/md/maxerr_cnt is setted to 20
/sys/block/md10/md/maxerr_cnt is setted to 20
/usr/local/lib/libmd: line 278: /sys/block/md10/md/maxerr_cnt: No such file or directory
umount: cannot open /proc/mounts
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Trying to move old root to /initrd ... /initrd does not exist. Ignored.
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing init memory: 128K
modprobe: FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory

INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...SAL (ERROR)  0 1 0 :Scsi command completed. pScb 80a76420, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
SAL (ERROR) CDB:12 1 0 0 fe 0 
SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0 
SAL (ERROR)  0 0 0 :Scsi command completed. pScb 80a76420, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
SAL (ERROR) CDB:12 1 0 0 fe 0 
SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0 
done.
Waiting for /dev to be fully populated...done.
Setting the system clock.
Activating swap...Adding 976552k swap on /dev/sda3.  Priority:-1 extents:1 across:976552k
Adding 976552k swap on /dev/sdb3.  Priority:-2 extents:1 across:976552k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/md1: clean, 17723/305216 files, 167860/1220672 blocks
done.
EXT3 FS on md1, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
Generating udev events for MD arrays...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
/dev/md0: clean, 16/125416 files, 50349/499713 blocks
done.
Setting kernel variables (/etc/sysctl.conf)...Unknown HZ value! (81) Assume 100.
done.
Mounting local filesystems...kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon...eth0: link down
eth0: started
.
Starting NFS common utilities: statd.
Setting console screen modes and fonts.
Start services: micro_evtd
INIT: Entering runlevel: 2
eth0: link up, full duplex, speed 100 Mbps
Starting enhanced syslogd: rsyslogd.
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Starting NFS common utilities: statd.
Not starting internet superserver: no services enabled.
Starting MD monitoring service: mdadm --monitor.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.

Debian GNU/Linux 5.0 TS-XL-EM4D8 ttyS0

TS-XL-EM4D8 login: 

firmware 1.06の uImage.buffalo + kiddouk氏提供の initrd で Debian Lenny を起動した場合

Marvell>> setenv initrd initrd.buffalo-kiddouk
Marvell>> boot

2294752 bytes read

8907026 bytes read
<<stop_sound>>
## Booting image at 02000000 ...
   Image Name:   Linux-2.6.22.18
   Created:      2009-07-17   4:57:28 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2294688 Bytes =  2.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
call do_bootm_linux
## Loading Ramdisk Image at 00900000 ...
   Image Name:   initrd
   Created:      2009-09-04  10:31:03 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    8906962 Bytes =  8.5 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

CONFIG_BUFFALO_PLATFORM ---
Uncompressing Linux................................................................................................................................................ done, booting the kernel.
Linux version 2.6.22.18 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #539 Fri Jul 17 13:57:12 JST 2009
CPU: ARM926EJ-S [41159260] revision 0 (ARMv5TE), cr=00053977
Machine: Feroceon-MV78XX0
Using UBoot passing parameters structure
u.mv_uboot.env_addr is 0xfff80000. Using tag's value.
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists.  Total pages: 130048
Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00900040,15M panic=5 BOOTVER=2.06
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB 0MB 0MB 0MB = 512MB total
Memory: 499584KB available (4180K code, 319K data, 128K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16

CPU 0, CPU Interface
-------------
SDRAM_CS0.... ....base 00000000, size 512MB 
SDRAM_CS1.... ....disable
SDRAM_CS2.... ....disable
SDRAM_CS3.... ....disable
DEVICE_CS0... ....base f8000000, size  32MB 
DEVICE_CS1... ....base fe000000, size   1MB 
DEVICE_CS2... ....base fc000000, size   1MB 
DEVICE_CS3... ....no such
DEV_BOOCS.... ....base fff00000, size 512KB 
DEVICE_SPI... ....base fff00000, size 512KB 
PEX0_IO...... ....base f2000000, size   8MB 
PEX0_MEM0.... ....base c8000000, size  64MB 
PEX1_IO...... ....base f3000000, size   8MB 
PEX1_MEM0.... ....base cc000000, size  64MB 
PEX2_IO...... ....no such
PEX2_MEM0.... ....no such
PEX3_IO...... ....base f5000000, size   8MB 
PEX3_MEM0.... ....base d4000000, size  64MB 
PEX4_IO...... ....base f6000000, size   8MB 
PEX4_MEM0.... ....base d8000000, size  64MB 
PEX5_IO...... ....no such
PEX5_MEM0.... ....no such
PEX6_IO...... ....no such
PEX6_MEM0.... ....no such
PEX7_IO...... ....no such
PEX7_MEM0.... ....no such
CRYPT_ENG..... ....base f7000000, size   2MB 
INTER_REGS... ....base f1000000, size   1MB 

  Marvell Development Board (LSP Version 2.0.2_MV78XX0)-- DB-MV78100-A-BP-BUFFALO  Soc: MV78100 A0 LE

 Detected Tclk 166666667 and SysClk 400000000 
Marvell USB EHCI Host controller #0: 808fd600
Marvell USB EHCI Host controller #1: 808fd400
Marvell USB EHCI Host controller #2: 808fd200
PEX0 interface detected Link X4
PEX4 interface detected no Link.
PCI: bus0: Fast back to back transfers disabled
SCSI subsystem initialized
Time: orion_clocksource clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 15360K
RTC registered.
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
>BuffaloCpuInterrupts_init
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
MICON V2 (C) BUFFALO INC. V.1.00 installed.
UPSDRV (C) BUFFALO INC. V.1.00 installed.
  OMRON contact type ups shutdown support enabled!
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
Buffalo RTC Driver (C) BUFFALO INC. Ver.1.00 (RS5C372) installed.
Buffalo GPIO SATA Hotplug Event Driver (C) BUFFALO INC. Ver.1.00 installed.
Use the XOR engines (acceleration) for enhancing the following functions:
  o RAID 5 Xor calculation
  o kernel memcpy
  o kenrel memzero
Number of XOR engines to use: 2
cesadev_init(8001237c)
mvCesaInit: sessions=640, queue=64, pSram=f7000000
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 12) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 13) is a 16550A
serial8250.2: ttyS2 at MMIO 0xf1012200 (irq = 14) is a 16550A
RAMDISK driver initialized: 3 RAM disks of 32768K size 1024 blocksize
loop: module loaded
Load Marvell Ethernet Driver
  o Cached descriptors in DRAM
  o DRAM SW cache-coherency
  o Single RX Queue support - ETH_DEF_RXQ=0
  o Single TX Queue support - ETH_DEF_TXQ=0
  o TCP segmentation offload enabled
  o Receive checksum offload enabled
  o Transmit checksum offload enabled
  o Network Fast Processing (Routing) supported
  o Proc tool API enabled
  o Rx descripors: q0=128
  o Tx descripors: q0=532
  o Loading network interface: 
eth0 eth1 
Network Fast Processing Disabled
mvFpRuleDb (9f180000): 16384 entries, 65536 bytes
mvSataInitAdapter : regVal changed(0x0000ff10)
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi2 : Marvell SCSI to SATA adapter
scsi3 : Marvell SCSI to SATA adapter
** BUFFALO Disable Command Queuing Function [0 0] **
** BUFFALO Disable Command Queuing Function [0 1] **
scsi 0:0:0:0: Direct-Access     Seagate  ST3250310AS      3.AA PQ: 0 ANSI: 5
Linux IAL (ERROR) [0 0 0]: set device max sectors to 2048 
scsi 1:0:0:0: Direct-Access     Seagate  ST3250310AS      4.AA PQ: 0 ANSI: 5
Linux IAL (ERROR) [0 1 0]: set device max sectors to 2048 
Integrated Sata device found
mvSataInitAdapter : regVal changed(0x00000010)
scsi4 : Marvell SCSI to SATA adapter
scsi5 : Marvell SCSI to SATA adapter
Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = 9f17b720
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = 9f17b720
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
SPI Serial flash detected @ 0xfff00000, 512KB (8sec x 64KB)
cmdlinepart partition parsing not available
    Write size     : 0x00000800
    OOB size       : 0x00000040
    Erase size     : 0x00020000
NAND device: Manufacturer ID: 0x20, Chip ID: 0xdc (ST Micro NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 2415 at 0x12de0000
cmdlinepart partition parsing not available
Using static partition definition
Creating 2 MTD partitions on "nand_mtd":
0x00000000-0x02000000 : "nboot"
0x02000000-0x20000000 : "nroot"
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    115 MB/s
raid6: int32x2    130 MB/s
raid6: int32x4    133 MB/s
raid6: int32x8     98 MB/s
raid6: using algorithm int32x4 (133 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: measuring checksumming speed
   arm4regs  :   824.400 MB/sec
   8regs     :   742.400 MB/sec
   32regs    :   822.400 MB/sec
raid5: using function: arm4regs (824.400 MB/sec)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda4
md: sda4 has invalid sb, not importing!
md: invalid raid superblock magic on sdb4
md: sdb4 has invalid sb, not importing!
md: autorun ...
md: considering sdb2 ...
md:  adding sdb2 ...
md: sdb1 has different UUID to sdb2
md:  adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md1
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
---- in linuxrc ---
Version 1.00 2008/ 7/ 1
Mon Mar  8 09:38:43 JST 2010
CheckDevices
LibSys_GetUsbDiskStartNum : Usb device not found(/sys/block/sdc/device). Returning 3
grep: /var/tmp/devlink: No such file or directory
linuxrc:choose operation (timeout 4[s])
 1:RamRoot 2:sda1 2:sda2 other:HddRoot  ? -HddRoot-
-- rebuild mdadm.conf for BOOT, ROOTFS --
mdadm: cannot open /dev/disk?_5: No such file or directory
mdadm: No arrays found in config file
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to 20
Starting :fsck_disks(boot) ...         [Success.]
-- rebuild mdadm.conf for BOOT, ROOTFS --
mdadm: cannot open /dev/disk?_5: No such file or directory
mdadm: No arrays found in config file
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to 20
/sys/block/md1/md/maxerr_cnt is setted to 20
/sys/block/md10/md/maxerr_cnt is setted to 20
/usr/local/lib/libmd: line 278: /sys/block/md10/md/maxerr_cnt: No such file or directory
umount: cannot open /proc/mounts
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Trying to move old root to /initrd ... /initrd does not exist. Ignored.
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing init memory: 128K
modprobe: FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory

INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...SAL (ERROR)  0 1 0 :Scsi command completed. pScb 80a76120, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
SAL (ERROR) CDB:12 1 0 0 fe 0 
SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0 
SAL (ERROR)  0 0 0 :Scsi command completed. pScb 80a76120, ScsiStatus 2 completionStatus MV_SCSI_COMPLETION_BAD_SCSI_COMMAND
SAL (ERROR) CDB:12 1 0 0 fe 0 
SAL (ERROR) Sense Data:72 5 24 0 0 0 0 c 0 0 0 0 0 0 0 0 0 0 0 0 
done.
Setting the system clock.
Activating swap...Adding 976552k swap on /dev/sda3.  Priority:-1 extents:1 across:976552k
Adding 976552k swap on /dev/sdb3.  Priority:-2 extents:1 across:976552k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/md1: clean, 17722/305216 files, 157499/1220672 blocks
done.
EXT3 FS on md1, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
Generating udev events for MD arrays...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
/dev/md0: clean, 16/125416 files, 50349/499713 blocks
done.
Setting kernel variables (/etc/sysctl.conf)...Unknown HZ value! (81) Assume 100.
done.
Mounting local filesystems...kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Setting console screen modes and fonts.
eth0: link down
eth0: started
Start services: micro_evtd
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting OpenBSD Secure Shell server: sshd.
Starting MTA:eth0: link up, full duplex, speed 100 Mbps
 exim4.
Starting NFS common utilities: statd.
Not starting internet superserver: no services enabled.
Starting MD monitoring service: mdadm --monitor.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.

Debian GNU/Linux 5.0 TS-XL-EM4D8 ttyS0

TS-XL-EM4D8 login: 

kiddouk氏提供の config を用いた 2.6.32 + kiddouk 氏作成の initrd の場合

Marvell>> boot

4340132 bytes read

8907026 bytes read
<<stop_sound>>
## Booting image at 02000000 ...
   Image Name:   linux-2.6.32
   Created:      2010-03-05   3:17:15 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4340068 Bytes =  4.1 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
call do_bootm_linux
## Loading Ramdisk Image at 00900000 ...
   Image Name:   initrd
   Created:      2009-09-04  10:31:03 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    8906962 Bytes =  8.5 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux................................................................................................................................................................................................................................................................................ done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32 (itou-r@sheeva02) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 Fri Mar 5 12:13:15 JST 2010
[    0.000000] CPU: Feroceon [41159260] revision 0 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Buffalo Nas WXL
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00900040,15M panic=5 BOOTVER=2.06
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 494976KB available (7928K code, 806K data, 180K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU-based detection of stalled CPUs is enabled.
[    0.000000] NR_IRQS:128
[    0.000000] Console: colour dummy device 80x30
[    0.000166] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[    0.230139] Security Framework initialized
[    0.230157] SELinux:  Disabled at boot.
[    0.230213] Mount-cache hash table entries: 512
[    0.230522] Initializing cgroup subsys ns
[    0.230537] Initializing cgroup subsys cpuacct
[    0.230548] Initializing cgroup subsys devices
[    0.230599] CPU: Testing write buffer coherency: ok
[    0.233258] xor: measuring software checksum speed
[    0.280024]    arm4regs  :   687.600 MB/sec
[    0.330025]    8regs     :   604.400 MB/sec
[    0.380020]    32regs    :   668.000 MB/sec
[    0.380031] xor: using function: arm4regs (687.600 MB/sec)
[    0.380231] NET: Registered protocol family 16
[    0.382380] MV78100-A0 core #0, PCLK = 800MHz, L2 = 267MHz, HCLK = 400MHz, TCLK = 167MHz
[    0.382411] Feroceon L2: Enabling L2
[    0.382466] Feroceon L2: Cache support initialised.
[    0.382487] gpiochip_add: gpios 0..31 (orion_gpio) not registered
[    0.399495] bio: create slab <bio-0> at 0
[    0.401264] vgaarb: loaded
[    0.401933] SCSI subsystem initialized
[    0.402708] usbcore: registered new interface driver usbfs
[    0.402968] usbcore: registered new interface driver hub
[    0.403143] usbcore: registered new device driver usb
[    0.570549] raid6: int32x1     89 MB/s
[    0.740242] raid6: int32x2    102 MB/s
[    0.910548] raid6: int32x4    107 MB/s
[    1.080271] raid6: int32x8     78 MB/s
[    1.080281] raid6: using algorithm int32x4 (107 MB/s)
[    1.081246] cfg80211: Using static regulatory domain info
[    1.081259] cfg80211: Regulatory domain: US
[    1.081269] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    1.081285] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    1.081301] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.081317] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.081333] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.081348] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.081364] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    1.081389] cfg80211: Calling CRDA for country: US
[    1.081523] Switching to clocksource orion_clocksource
[    1.086643] Slow work thread pool: Starting up
[    1.086781] Slow work thread pool: Ready
[    1.086838] FS-Cache: Loaded
[    1.087063] CacheFiles: Loaded
[    1.088662] NET: Registered protocol family 2
[    1.088948] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    1.089839] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.090490] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    1.090756] TCP: Hash tables configured (established 16384 bind 16384)
[    1.090769] TCP reno registered
[    1.090981] NET: Registered protocol family 1
[    1.091274] RPC: Registered udp transport module.
[    1.091285] RPC: Registered tcp transport module.
[    1.091296] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.091465] Trying to unpack rootfs image as initramfs...
[    1.091748] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[    1.168194] Freeing initrd memory: 15360K
[    1.169238] audit: initializing netlink socket (disabled)
[    1.169281] type=2000 audit(1.160:1): initialized
[    1.169874] VFS: Disk quotas dquot_6.5.2
[    1.169999] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.171047] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.172190] JFS: nTxBlock = 3989, nTxLock = 31914
[    1.173804] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    1.174557] SGI XFS Quota Management subsystem
[    1.174591] msgmni has been set to 997
[    1.177170] alg: No test for stdrng (krng)
[    1.177200] async_tx: api initialized (async)
[    1.177428] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.177445] io scheduler noop registered
[    1.177455] io scheduler anticipatory registered
[    1.177466] io scheduler deadline registered
[    1.177535] io scheduler cfq registered (default)
[    1.188761] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.189886] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 12) is a 16550A
[    1.681789] console [ttyS0] enabled
[    1.686239] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 13) is a 16550A
[    1.693426] serial8250.2: ttyS2 at MMIO 0xf1012200 (irq = 14) is a 16550A
[    1.700560] serial8250.3: ttyS3 at MMIO 0xf1012300 (irq = 15) is a 16550A
[    1.715094] brd: module loaded
[    1.722115] loop: module loaded
[    1.725883] sata_mv sata_mv.0: version 1.28
[    1.730191] sata_mv sata_mv.0: slots 32 ports 2
[    1.735714] scsi0 : sata_mv
[    1.738968] scsi1 : sata_mv
[    1.742150] ata1: SATA max UDMA/133 irq 26
[    1.746231] ata2: SATA max UDMA/133 irq 26
[    1.751723] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[    1.758226] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[    1.776469] MV-643xx 10/100/1000 ethernet driver version 1.4
[    1.782335] mv643xx_eth smi: probed
[    1.789187] net eth0: port 0 with MAC address 00:1d:73:df:04:d8
[    1.798085] net eth1: port 0 with MAC address 00:1d:73:df:04:d9
[    1.804151] tun: Universal TUN/TAP device driver, 1.6
[    1.809180] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.815552] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    1.824078] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    1.832904] console [netcon0] enabled
[    1.836552] netconsole: network logging started
[    1.841502] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.848099] orion-ehci orion-ehci.0: Marvell Orion EHCI
[    1.853581] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[    1.881573] orion-ehci orion-ehci.0: irq 16, io mem 0xf1050000
[    1.901556] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[    1.907509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.914287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.921484] usb usb1: Product: Marvell Orion EHCI
[    1.926177] usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd
[    1.931559] usb usb1: SerialNumber: orion-ehci.0
[    1.936502] usb usb1: configuration #1 chosen from 1 choice
[    1.942303] hub 1-0:1.0: USB hub found
[    1.946073] hub 1-0:1.0: 1 port detected
[    1.950358] orion-ehci orion-ehci.1: Marvell Orion EHCI
[    1.955818] orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2
[    1.991569] orion-ehci orion-ehci.1: irq 17, io mem 0xf1051000
[    2.011557] orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00
[    2.017503] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.024285] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.031480] usb usb2: Product: Marvell Orion EHCI
[    2.036175] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[    2.041567] usb usb2: SerialNumber: orion-ehci.1
[    2.046578] usb usb2: configuration #1 chosen from 1 choice
[    2.052368] hub 2-0:1.0: USB hub found
[    2.056137] hub 2-0:1.0: 1 port detected
[    2.060406] orion-ehci orion-ehci.2: Marvell Orion EHCI
[    2.065874] orion-ehci orion-ehci.2: new USB bus registered, assigned bus number 3
[    2.101568] ata1: SATA link down (SStatus 0 SControl F300)
[    2.107147] orion-ehci orion-ehci.2: irq 18, io mem 0xf1052000
[    2.131555] orion-ehci orion-ehci.2: USB 2.0 started, EHCI 1.00
[    2.137493] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.144274] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.151464] usb usb3: Product: Marvell Orion EHCI
[    2.156161] usb usb3: Manufacturer: Linux 2.6.32 ehci_hcd
[    2.161538] usb usb3: SerialNumber: orion-ehci.2
[    2.166485] usb usb3: configuration #1 chosen from 1 choice
[    2.172266] hub 3-0:1.0: USB hub found
[    2.176032] hub 3-0:1.0: 1 port detected
[    2.180705] usbcore: registered new interface driver usblp
[    2.186334] usbcore: registered new interface driver cdc_wdm
[    2.192022] Initializing USB Mass Storage driver...
[    2.197088] usbcore: registered new interface driver usb-storage
[    2.203099] USB Mass Storage support registered.
[    2.207826] usbcore: registered new interface driver ums-alauda
[    2.213882] usbcore: registered new interface driver ums-cypress
[    2.219994] usbcore: registered new interface driver ums-datafab
[    2.226130] usbcore: registered new interface driver ums-freecom
[    2.232271] usbcore: registered new interface driver ums-isd200
[    2.238299] usbcore: registered new interface driver ums-jumpshot
[    2.244527] usbcore: registered new interface driver ums-karma
[    2.250469] usbcore: registered new interface driver ums-onetouch
[    2.256699] usbcore: registered new interface driver ums-sddr09
[    2.262753] usbcore: registered new interface driver ums-sddr55
[    2.268782] usbcore: registered new interface driver ums-usbat
[    2.274989] mice: PS/2 mouse device common for all mice
[    2.280445] i2c /dev entries driver
[    2.285009] Driver for 1-wire Dallas network protocol.
[    2.290503] md: linear personality registered for level -1
[    2.296012] md: raid0 personality registered for level 0
[    2.301299] md: raid1 personality registered for level 1
[    2.306598] md: raid10 personality registered for level 10
[    2.312073] md: raid6 personality registered for level 6
[    2.317360] md: raid5 personality registered for level 5
[    2.322656] md: raid4 personality registered for level 4
[    2.327944] md: multipath personality registered for level -4
[    2.333676] md: faulty personality registered for level -5
[    2.339301] device-mapper: uevent: version 1.0.3
[    2.344197] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.352904] device-mapper: multipath: version 1.1.0 loaded
[    2.358366] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.365092] cpuidle: using governor ladder
[    2.369175] cpuidle: using governor menu
[    2.373441] Netfilter messages via NETLINK v0.30.
[    2.378184] nf_conntrack version 0.5.0 (7978 buckets, 31912 max)
[    2.384516] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    2.391895] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    2.399775] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    2.406793] ctnetlink v0.93: registering with nfnetlink.
[    2.412204] xt_time: kernel timezone is -0000
[    2.417991] IPv4 over IPv4 tunneling driver
[    2.423411] GRE over IPv4 tunneling driver
[    2.430061] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.435482] ClusterIP Version 0.8 loaded successfully
[    2.440555] arp_tables: (C) 2002 David S. Miller
[    2.445284] TCP cubic registered
[    2.448698] NET: Registered protocol family 10
[    2.455500] lo: Disabled Privacy Extensions
[    2.464783] tunl0: Disabled Privacy Extensions
[    2.472791] NET: Registered protocol family 17
[    2.477232] NET: Registered protocol family 15
[    2.481921] Bridge firewalling registered
[    2.485924] Ebtables v2.0 registered
[    2.489719] ebt_ulog: out of memory trying to call netlink_kernel_create
[    2.496419] NET: Registered protocol family 5
[    2.500943] NET: Registered protocol family 9
[    2.505293] X.25 for Linux Version 0.2
[    2.509287] lib80211: common routines for IEEE802.11 drivers
[    2.515098] ata2: SATA link down (SStatus 0 SControl F300)
[    2.521042] registered taskstats version 1
[    2.525239] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.531535] md: Waiting for all devices to be available before autodetect
[    2.538307] md: If you don't use raid, use raid=noautodetect
[    2.544583] md: Autodetecting RAID arrays.
[    2.548662] md: Scanned 0 and added 0 devices.
[    2.553124] md: autorun ...
[    2.555901] md: ... autorun DONE.
[    2.559311] RAMDISK: Couldn't find valid RAM disk image starting at 0.
[    2.572661] VFS: Cannot open root device "sda2" or unknown-block(0,0)
[    2.579074] Please append a correct "root=" boot option; here are the available partitions:
[    2.587429] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    2.595699] [<c003ad28>] (unwind_backtrace+0x0/0xdc) from [<c05cb404>] (panic+0x34/0x128)
[    2.603869] [<c05cb404>] (panic+0x34/0x128) from [<c0008f1c>] (mount_block_root+0x25c/0x2b4)
[    2.612289] [<c0008f1c>] (mount_block_root+0x25c/0x2b4) from [<c0009148>] (prepare_namespace+0x168/0x1cc)
[    2.621834] [<c0009148>] (prepare_namespace+0x168/0x1cc) from [<c000845c>] (kernel_init+0xec/0x128)
[    2.630860] [<c000845c>] (kernel_init+0xec/0x128) from [<c003687c>] (kernel_thread_exit+0x0/0x8)
[    2.639619] Rebooting in 5 seconds..

トップ   差分 バックアップ リロード   一覧 単語検索 最終更新   ヘルプ   最終更新のRSS
Last-modified: 2010-03-08 (月) 18:49:39 (3539d)